 |
|
|
SLG
Slide Gate Operator
When an extra measure of building or perimeter security is
required, consider our line of industrial slide gate operators.
Our field proven gate operators are in use throughout the
world and are engineered to give many years of reliable service.
|
|
 |
• Printed circuit
board design
• Heavy gauge welded steel cabinet with weather-tight
gasket around the door and output drive shaft
• Double-grooved machined steel motor pulley with twin
V-belt drive to input shaft
• Rotary type limits, ball bearing and permanently lubricated,
with machined cams and spring-loaded retainers
• 1” steel output shaft mounted in self-aligning
pillow block bearings
• Emergency disconnect
|
SPECIFICATIONS
| Model |
SLG12 |
SLG12 |
SLG1 |
| Motor Hp |
1/2 HP |
3/4 HP |
1 HP |
| Max. Gate Weight |
900 lbs |
1200 lbs |
1500 lbs |
| Max.
Opening Width |
Cantilever |
20 ft (6m) |
20 ft (6m) |
32 ft (10m) |
| Roller |
26 ft (8m) |
36 ft (11m) |
48 ft (15m) |
| Overhead |
36 ft (11m) |
46 ft (14m) |
58 ft (18m) |
| Max. Cycles Per Hour |
40 |
30 |
20 |
| Gate Travel Speed |
50 ft/min (15 m/min) |
| Shipping Weight |
330 lbs (150 kg) |
| Standard Voltages |
120V or 240V Single Phase (other voltages, please specify) |
| Right or left hand operation. Full
motor overload protection. |
|
CHOICE OF CONTROLS
• Pushbutton Station
• Programmable Card Reader
• Radio Control
• Key Switch
• Remote Custom Console
• Vehicle Loop Detector
• Heater
|
|
|
Direct Drive Barrier
Gate
;){kind=link}